Eco Building Products Home Page

Your one-stop shop for Renewable Products, Eco Products and Energy Saving Solutions

Free delivery within 50 miles

Call us now on
01778 380661

In this section: Thermal Insulation | Hemp Insulation | Sheepswool Insulation | Internal Wall Insulation | External Wall Insulation

Interior Insulation for External Walls

Mould Growth Consultants - Sempatap ThermalThe use of fuel adds to the release of carbon dioxide into the atmosphere which ultimately contributes to the threat of global warming. An excessive amount of energy is wasted owing to lack of insulation on solid brick walls, concrete walls and other poorly insulated surfaces. Sempatap Thermal provides an economical solution to this problem.

NB: This product is designed to be used inside the building, on external walls.

Mould Growth Consultants - Sempatap Thermal

Sempatap ThermalSempatap Thermal has been in use in the UK and Europe for over 20 years. It has been successfully installed in 1,000's of flats and houses by Local Authorities and Housing Associations for combating condensation problems. Sempatap Thermal is the 10mm variety specifically developed for energy conservation. It is a remarkable material which, when applied inside the property on external walls, substantially reduces heat loss and rooms immediately feel warmer. The material has been tested by the National Physical Laboratory and figures produced by the Building Research Establishment show considerable kilowatt saving.

As simple as wallpaper to apply, Sempatap Thermal provides warmer living conditions within the home, helps minimise heat loss through cold walls and dramatically reduces the incidence of condensation. Sempatap Thermal is quick and easy to put up with hardly any mess and can be decorated with virtually any finish - emulsion, wallpaper - it can even be tiled.

The energy savings using Sempatap Thermal are dramatic and can be used on all types of homes, flats, houses, bungalows and mobile homes. It can also be applied on a DIY basis. Sempatap Thermal can not only be used for insulating solid walls, it can also be used for ceilings, flat concrete ceilings, mansard roofs and dormer ceilings.

Sempatap Thermal is the easy to use, economical solution for reducing CO2 emissions and lowering heat loss. It makes the property more energy efficient and immediately provides a warmer and more comfortable environment whilst helping to protect against Global Warming.

Product Benefits

  • Easy and quick to install
  • Immediate warmth and comfort
  • Reduces risk of ill health
  • Lower fuel bills
  • Approved for EEC funding
  • EST (Energy Saving Trust) 'Recommended' product
  • Economical to use

Technical Information

  • Roll Size: 1m wide x 12.5m long
  • Thickness: 10mm
  • Weight/roll: 25kg
  • Weight/m²: 2kg
  • Thermal Resistance: 0.158m² K/W
  • Resistance of untreated wall  = 1/2.1 = 0.476
  • Resistance with SEMPATAP = 0.476 + 0.158 = 0.634
  • U-value with SEMPATAP  = 1/0.634 = 1.58 W/m²K
  • Life expectancy: 30 years

 

28th August 2014

You could be £800 a year better off with a Lark Energy Solar PV System

Affordable Warmth - A new boiler and nothing to pay!

Latest News

October 2013

 Larkfleet Installs Oakham's First Town Centre Electric Vehicle Charging Point

May 2013

 Lincolnshire merchant awarded sustainable timber supplier accreditation

April 2013

 Lark Energy Sponsors Investors in the Environment awards

April 2013

 UK among top 20 global utility-scale markets

 

products

For the complete range of Eco Building Products please visit our Products page

 

Enquiries

For further information about eco friendly products for your project, send us an Enquiry or call us on 01778 380661

 

subscribe!

Subscribe to our periodic Products Newsletter for news on the latest eco-friendly building products.